1. Diagnostics of working surfaces of cylinders 2. Polishing of working surfaces of cylinders     3. Drawing wearproof and corrosion - stable coverings     4. Drawing of the combined covering "Carbid-Teflon" (Piko M Klin)     5. Drawing of coverings with high factor of friction "Piko M Fric" on lime regeneration     6. Drawing of a covering "Piko M Micro " on internal surfaces of pressure head boxes     7. Restoration of landing places antifriction bearings on pins and in cases of large-sized units of the equipment: drying rolls, pressing calendars, sieve drums, &etc., without dismantle on a place of their installation, or in repair shop     8. Restoration of the worn out basic rollers and bandages of lime-recovery kilns and barking drums without dismantle and with the subsequet adjustment and mechanical fettling     9. Restoration of basic surfases of corrosion & battered base trunks PM, BM and DM     10. Hermetic sealing of boxes of parasitic drives PM and BM     11. Restoration of the worn out sealing devices of drum-type filters and densifiers     12. Repair of an internal surface of shirts of sucking away shaft     13. Restoration of a landing plase driven pins of sucking away shaft     14. Restoration of working capacity of granite shaft at local damages and destructions     15. Restoration of trumpet boards heat exchangers and cases of evaporating devices     16. Manufacturing and delivery blade for full-creped cylinders with an adjustable corner of an inclination and spare parts to them
| 
